Complete sump kit which moves the oil filter out from within the sump to a recess under the sump. This simplifies and speeds up oil changes because the sump no longer needs to be removed. Oil cooling is also improved because oil will cool through the body of the filter. The complete sump kit is a simple fit that will speed up oil changes and reduce the risk of stripping crankcase bolts through repeated sump removal. It is very similar to the arrangement on modern CARC models. Replaces sump extension ENA14002. Finished in silver this is a great upgrade for your Guzzi. Uses oil filter SIA14530

Depending on model you may need a longer dipstick e.g. ENA28495. You can calibrate the sump by adding 3l of oil and marking the position on the dipstick. Note that you need to transfer your oil pressure relief valve and the intake screen from your existing sump into this new one. Note also that the stamped steel covers on some oil pressure relief valves flare wider than others so you may need to make a little clearance in order to get the threads started. Also available at additional cost in black by special order - ENA14006

 This part is available by special order, request a quote

Flywheel, originally intended for dual point and Motoplat ignitions

2-33° of ignition advance. Supercedes V7 loop frame flywheel 12067000 . Weighs 4.2kg

 This part is available by special order, request a quote

 17067050 GU17067050 17 06 70 50
 1706 7050 1706.7050 17.06.70.50

1 metre of Ariete fuel pipe suitable for fuel and breather pipe applications on gravity fed non injection models, cut your fuel lines to your own spec

Certified ethanol proof and safe for modern E10 fuel. Hose clips also available, see FUA00004

 More than 5 in stock

High pressure black fuel line / fuel line, can be used to replace fuel line on other models with 6mm ID fuel lines

This high pressure fuel hose is rated to 225 PSI. It has been designed for use with Modern Chemically Aggressive Bio-Ethanol Enriched Petrol Formulations (E5 & E10) As per currently served petrol pump petrol. Confirms to SAE J30 R7 and BS AU 108. See FUA00004 for hose clips

 5 in stock

AP8144069

Gasket for crankcase oil breather feed

 More than 5 in stock

 12007600 GU12007600 12 00 76 00
 1200 7600 1200.7600 12.00.76.00

Inlet manifold gasket

To suit Dellorto PHF carbs, 1 gasket per carb

 More than 5 in stock

14115550-z 14115550 GU14115550 14 11 55 50
 1411 5550 1411.5550 14.11.55.50

Top end gasket and seal set containing rocker cover, base, head and exhaust gaskets plus top end O rings

Top end gasket set for one cylinder. Inlet manifold gasket ENA27155 available separately

 3 in stock

Top end gasket and seal set containing rocker cover, base and head gaskets plus top end O rings

Top end gasket set for one cylinder. Inlet manifold gasket ENA27155 and exhaust gasket ENA90718 available separately

 This part is due back in stock soon, call 01484 841395 to reserve yours

Quality rocker cover gasket for square barrel 850, 1000 and 1100 models

Can also be used in place of ENA97139 on CARC models, some customers report that this gasket fixes problems with weaping rocker covers on these models

 More than 5 in stock

 14023760 GU14023760 14 02 37 60
 1402 3760 1402.3760 14.02.37.60

Complete gasket kit

This is only a gasket set, it does not include oil seals and O rings. The top end O rings required are 12x ENA97624 and 2 x ENA90203

 1 in stock

30999060-z 30999060 GU30999060 30 99 90 60
 3099 9060 3099.9060 30.99.90.60